HVAC System Repairs

HVAC Maintenance and Energy Savings

HVAC systems Repairs

HVAC systems in most homes & commercial buildings account for more than 40 percent of the total energy use. Maintaining properly running HVAC systems at peak efficiency is crucial in managing and saving energy use. Good HVAC system maintenance is not only important in controlling energy use but also for the proper operation of the systems at people convenience. For instance, most of the telecommunications systems require specific environmental conditions for proper operation. At times, temperature and humidity levels fall outside the specified range, leading to costly system failures and interruption in services. Therefore, proper HVAC system maintenance is key to the running of most businesses.

Proper care of your AC and heating system includes seeing into it that air conditioning maintenance is performed. This means not just doing some maintenance tasks yourself, but having a certified professional come check out it once in a while.

Air Conditioner

If you reside in a warm environment, you probably couldn’t cope with the temperature without your trusty HVAC. Maintenance should include checking the refrigerant levels. The system should be cleaned, and the components responsible for blowing the air adjusted as necessary. An undercharged system may also drain efficiency from the machine, which increases the monthly electric expenses.

Heating system

As an essential part of your HVAC system, consider maintaining it for the best performance. This depends on how your furnace works. It could mean looking at your gas levels as well as pressure, making sure your heat exchanger is working right and seeing to it that all the necessary components are operating smoothly. Cleaning out the furnace can also slow up the impact of puff back. Change the filter frequently. Dust and dirt get caught within the filter, and it may impede airflow if left this way. You can change the filter after a period of six months or clean it on a monthly basis.

HVAC ENERGY SAVING

The main purpose of HVAC is to provide thermal comfort and favorable indoor air quality. The HVAC economizer offers some saving features to save energy.

1. Economizer provides fresh air in exchange for using less energy to run the air conditioner.

2. Economizer enables people to opt for free cooling early.

3. Economizer provides a means of limiting fan run time.

4. It offers you fresh air automatically or when you want it.

5. It increases the life of AC compressor.

6. The system can run with or without conditioner compressor call.

7. The system provides attic relief that improves comfort and reduces cooling cost.

8. The system does not need any user interaction. One button override provides the option to get free cooling or fresh air beyond automatic operation.

9. It will work in conjunction with your existing HVAC system and comes with a plug and play installation.

People can very easily eliminate the indoor allergies and shunt them outside with the help of the HVAC economizer. With the right kind of economizer, you will be able to have fresh air of outside in your home. An economizer is an auxiliary system that can be added to a new or existing forced air HVAC system. The economizer provides controlled, monitored, and dedicated fresh air pathway into home’s existing air conditioning system.Many companies are providing economizers these days as they are very helpful in saving energy, therefore, reducing electricity bills.

The Benefits of Air Duct Cleaning

The air ducts in your home provide a very important function. They circulate the air from your heating and cooling system into and out of each room, which allows for consistent interior comfort regardless of the season.

In fact, all of the air in your home circulates through the ducts multiple times a day. The air cycling through your ducts is the same air that completely fills your living environment…and it is the same air that you and your family breathe. As such, you want this air to be as clean as possible.

Air Duct Cleaning refers to the removal of dust and contaminants within the ductwork. This includes the supply and return air ducts as well as the registers and diffusers in each room. Powerful vacuums whisk away all dust and debris, preventing it from re-circulating throughout the home.

There are many benefits to having your air ducts professionally cleaned, the top five of which are listed below:

Creates a Cleaner Living Environment
Having your air ducts professionally cleaned reduces the dust that would otherwise circulate throughout your living space, landing on your furniture, your bedding, your flooring…just about everywhere. Fortunately, a thorough air duct cleaning reduces the amount of interior cleaning and dusting necessary to maintain a hygienic home.
Reduces Allergens and Irritants
In addition to dust, air ducts frequently contain harmful contaminants and micro-organisms. These include pet dander, bacteria, pollen, mildew, mold spores, and similar toxins. People who suffer from allergies, asthma, and other respiratory problems are particularly sensitive to these airborne particles. A periodic air duct cleaning promotes healthier living…otherwise the dirty air in your home just keeps re-circulating over and over.
Helps Everyone Breathe Easier
Even if no one in your household suffers from chronic allergies or respiratory problems, cleaner air makes it easier for everyone to breathe. Even among the most healthy, dust and pollutants entering the nose and lungs can trigger sneezing and coughing, as well as sinus and bronchial congestion. Air duct cleaning creates a more comfortable environment and promotes well-being. Given the choice between clean air and dirty air, which would you rather breathe?
Removes Unpleasant Smells and Odors
Pets, household cleaning agents, paint fumes, mold, tobacco use and even food preparation all contribute to stale smells in the air ducts. Every time the furnace or air conditioner is running, these odors will repeatedly flow through the house. Even an accumulation of dust and dirt over the years can lead to a musty scent coming from the ductwork. A detailed cleaning of the air ducts removes all odor trapping particles, resulting in a fresher smelling home.
Improves Air Flow Efficiency
Ductwork and registers that have a heavy build-up of dust and grime can restrict the flow of air from the furnace and air conditioner. This means your system will have to work harder to heat or cool your home, resulting in a decreased level of efficiency. Conversely, a clean system will operate at peak efficiency and provide the most cost-effective performance for your energy dollar.

How often should you clean your air ducts?

Numerous property owners who’ve hired a reputable air duct cleaning contractor are generally pleased together with the results. Even though there is no scientific evidence to prove that vent cleaning includes a direct and considerable benefit, authorities agree there is some benefit to possessing air duct cleaning performed, particularly if you employ a professional skilled in the best way to clean air ducts.

The National Air Duct Cleaners Association recommends having your air ducts cleaned every single three to 5 years. you must think about undertaking it each and every two to five years, based on their circumstances.

“How usually you will need it’s going to depend on what part of the nation you are in, how usually you use your method, and if any individual in your home has allergies or asthma,” Mack says.

When to clean your air ducts

• You suspect mold exists within the air ducts.

• You notice a vermin infestation someplace inside the home, or you see insects or rodents getting into or exiting ductwork.

• You see a visible “poof” of dust released in the supply registers when air is exiting the vents.

Mack recommends taking a look inside your air vent register. “If you notice black debris about the outside, that’s pollutants that have been recycled by way of the system more than and over once again, and that is a sign your method is excessively soiled,” he says. “Also, have a look at your method whenever you transform your filter. If there’s lots of dust buildup in that location, that’s one more sign you happen to be overdue to get a cleaning.”

How to clean your dryer vents

The U.S. Fire Administration reports that each and every year greater than 2,900 property fires are started by clothes dryers, plus the top result in of these fires is really a buildup of lint on account of lack of easy upkeep around the portion with the owner. Each load of laundry that passes by means of your washing machine and makes its strategy to your garments dryer consists of lint-mostly smaller particles of cloth and fiber that are loosened from clothing by the action of agitating water.

In the event you think that the removable lint filter inside your dryer catches all this, consider again. The problem is that not all of the lint is caught by the removable lint filter, but the lint that passes beyond the filter and is trapped in crevices deep inside the lint filter trap and all along the dryer vent hose or duct as it makes its approach to the outside vent opening.

Warning Signs
Here are some warning indicators that hazardous lint buildup has occurred within your dryer and venting system, indicating that it requires a thorough cleaning:

Clothes take longer to dry or do not dry fully
Clothes are hotter than normal in the end on the drying cycle
Outdoors of dryer gets pretty hot
Outside exhaust vent flapper doesn’t open quite substantially, indicating low exhaust velocity
Laundry area becomes far more humid than usual
Burnt smell is evident inside the laundry area
Tools and Materials You will need
Vacuum having a long hose attachment
Dryer vent brush kit
Screwdrivers
UL-listed metal foil duct tape
02
of 08
Dryer Vent Cleaning Brush Kit
Dryer duct cleaning tool
Image courtesy of Amazon
Thorough dryer vent cleaning needs unique brushes. Vacuum attachments alone don’t function at the same time simply because they usually do not agitate the lint to remove it from the walls with the duct, and they cannot reach deep enough inside the dryer’s lint filter housing.

Brush kits include a long-bristle brush to clean the lint filter area, also as a round-bristled brush that will clean out a 4-inch round rigid dryer duct-the kind it is best to have for all concealed portions of one’s duct run. The round…
A lot more
03
of 08
Step 1: Eliminate the Lint Trap Filter
Cleaning dryer lint filter
Lisa J. Goodman / Getty Images
Get rid of and clean the lint trap filter. That is precisely the same point you must do ahead of or immediately after every single dryer load to maintain as a lot lint out of the venting system as you can, but surprisingly, lots of persons usually do not do this. Cleaning the lint trap with each and every load would be the most effective approach to protect against lint buildup regularly.

04
of 08
Step two: Vacuum the Lint Trap Housing
Cleaning dryer lint trap housing

Vacuum the inside of the lint trap housing, making use of a lengthy, skinny hose attachment. Adhere to this initial vacuuming using a second pass making use of the long versatile brush from the brush kit. Extend the brush all the way in to the bottom on the cavity. Utilizing a gentle and slight twisting motion, pull out the brush to extract clumps of lint. Clean the brush bristles with all the vacuum. Repeat as required until there’s no extra lint that could be removed in the cavity.

05
of 08
Step 3: Disconnect the Dryer Duct
Lint Clogged Vertical and Corner Dryer Ducts

Unplug the dryer and turn off the gas valve in the dryer (for gas dryers). Disconnect the duct joint closest towards the dryer, then gently pull the dryer away from the wall. Disconnect the remaining exposed sections of dryer duct. When the sections are taped, remove and discard the tape.

06
of 08
Step four: Vacuum the Ductwork
dryer duct brush

Attach the round duct brush head for the versatile fiberglass shaft, following the brush kit manufacturer’s directions. Insert the brush into every duct section and sweep it clean by utilizing a rotating motion even though pushing the brush back and forth. Pull out the brush and clean the head often.

Clean the remainder of the duct run making use of exactly the same strategies, adding a lot more sections of your flexible shaft as needed to reach the finish on the rigid duct. Repeat till no much more lint comes out with the duct….
Far more
07
of 08
Alternative Technique
Use a Gong Brush as a Makeshift Dryer Duct Brush

In case you do not have a dryer vent brush kit, it is possible to use a long-handled scrub brush to clean brief sections of rigid duct. Though the brush includes a restricted attain, you may clean every single duct section by going through each ends.

how to clean your heater vents

One of the very best approaches to ensure that the air in your property is clean is always to clean your air vents. The air ducts inside your residence contain millions of particles of dust, hair, dirt, pollen, spider webs and also other allergens [source: Alpine Air Duct]. Cleaning your air vents will also save you income on heating and air conditioning. So study the suggestions listed beneath and find out about how you’ll be able to clean the air vents inside your home.

Here’s what you will want:

Heavy duty vacuum
Screwdriver
Broom
Cleaning Brush
Here’s what to accomplish:

Turn off the energy connected towards the heating and air conditioning method [source: Trusted Remodeler].
Unscrew the air duct covers or grilles in the walls. Use your brush to clean the grates completely. If they are pretty dusty and grimy, you might need to use soap and water to create them gleam.
Vacuum the ducts as considerably as possible. Look at renting a heavy duty vacuum for this purpose. The standard household vacuum is not highly effective adequate to clean deep in to the crevices of your ducts. Make certain that the vacuum you rent includes a lengthy hose to reach deep in to the ducts. This really is important, as there could possibly be mold and mildew developing inside the air ducts [source: Repair Home]. If you want the ducts to become cleaned far more completely, consider hiring an expert to perform the job.
Clean the grilles inside your ceiling. Should you cannot attain them using the vacuum or screwdriver, use a broom to attack the dust. Bear in mind that for those who haven’t cleaned them for any long time, you might wish to shield your self from all of the dust and debris that can fall down by wearing a dust mask.

How to clean your own air ducts? Westminster, CO

Things You’ll need to Clean Your Air Ducts
Furnace Filter. You may undoubtedly will need a brand new furnace filter at the end on the job. Make sure you select the best filter alternative for you personally.
Vacuum. A household-type vacuum using a decent hose attached will operate, but a heavier-duty “Shop Vac” unit is improved, if offered.
Brush. A thing closely resembling a toilet brush will function finest, but a stiff-bristle paintbrush or one thing equivalent will do.
Screwdriver or Hex Driver. Your registers are most likely held in location by some sort of fasteners. You’ll need to work with whatever tool fits the fasteners, typically a Phillips screwdriver or 1/4″ hex driver.
Paper Towels. Unless you’d like to accomplish many dusting and sweeping right just after you clean your ducts, you will discover these helpful to cover some registers while you clean other people.
Step-By-Step Duct Cleaning
1. Cover provide registers. Begin by covering up your supply air registers (openings that provide heated air for the rooms) with paper towels. You do that to help keep dislodged dust from drifting in to the rooms as you operate. Basically lift the register, wrap the paper towel more than the prime of it, and replace it.

Covering the register helps keep the dust down.
Covering the register helps holdSource
Need to have New Registers?
Accord ABFRBR410 Floor Register with Louvered Design, 4-Inch x 10-Inch(Duct Opening Measurements), BrownAccord ABFRBR410 Floor Register with Louvered Design, 4-Inch x 10-Inch(Duct Opening Measurements), Brown
Invest in Now

2. Turn on fan. You would like the fan operating whilst you’re cleaning, to move the dust along that you’re going to loosen along with your banging and brushing. Set the thermostat to “fan on,” and shut off the “heat/cool” mode so that only the fan is operating. In the event you do not possess a fan-only option, you’ll be able to run the heat, or you might take this opportunity to set up a newer thermostat with this valuable selection.

three. Verify filter. Be certain your old furnace filter is in spot, in order that the dust you knock loose does not wind up acquiring pulled in to the fan motor.

4. Loosen dust in ducts. Knock loose any buildup of dust within the duct operate. Merely take the handle of one’s brush and start tapping on any accessible duct work you might have inside the basement. This can help break up any deposits of dampened dust that might have stuck towards the insides in the duct.

five. Clean provide registers. Now you may begin sweeping out the dust within your supply registers. Using the vacuum operating along with the end of the hose near the register, lift the register. Use the hose to catch any dust that’s getting pushed out by the fan, and proceed to sweep as far into the register’s piping as your hose can attain. Use your brush to scuff loose any built up dust in the register. As you undergo the house sweeping out the supply registers, you are able to take away and dispose on the paper towels you have place in spot.

The registers inside the floor ought to lift out simply.
The registers within the floor must lift out simplySource
six. Clean return air registers. Sweep out your return air registers. These will likely be fastened with a screw and demand your tool to eliminate them. Once again, brush and sweep as far back in to the register piping or cavity as you can.

Return air registers are often mounted to the wall. They gather a lot more dust and dirt than provide registers.
Return air registers are often mounted towards the wall. They gather more dust and dirt than supplySupply
7. Shut off fan and furnace. Shut the fan off at the thermostat and the energy off for the furnace through the service switch or breaker panel. Usually do not just shut off the thermostat, simply because that does not turn off the power towards the unit.

eight. Clean out blower compartment and return air boot. With all the energy off, it is possible to take away the panels on the front of the furnace and access the blower compartment and also the return air boot. Use your vacuum to sweep up the dust built up inside the blower compartment and return air boot. This is where the excellent bulk of your dust might be. Because you are in here, you’ll want to clean the furnace fan also.

9. Replace furnace filter. Purchasing a far better filter will definitely reduce down on the dust inside your house. But the superior the filter, the additional often you need to modify it; a dirty filter restricts the airflow towards the fan, which results within the blower motor operating hotter and lowering its lifespan. How normally it is best to modify your filter is dependent upon your property, your pets, and your place.

A furnace filter
A furnace filter
Accessing Most important Ducts
The places you may not reach using the actions above aren’t most likely to include lots of dust and dirt. Nevertheless, should you are determined to clean every single location you’ll be able to, you will discover a couple additional factors it is possible to do.

1. Take away finish caps from rectangular duct operate. For those who have rectangular duct work, like within the picture under, you can remove the finish caps to access the inside in the ducts. You may slide the “drives” down off the duct and pull the cap out on the “slips.” So long as the duct is just not butting up against the wall, you ought to be able to reach your vacuum hose in via the space uncovered by removing the cap, and sweep out any dust you obtain. You might even use a flashlight to appear inside the duct for dirty locations.

The vertical piece of metal around the ideal is called a drive. It’s folded over around the top rated and bottom of the duct to hold it in place. Having a pair of pliers, you could unfold it and pull the drive down off the duct on both sides to detach the two pieces.
The vertical piece of metal around the proper is named a drive. It is folded more than on the best and bottom with the duct to hold it in spot. Having a pair of pliers, you could unfold it and pull the drive down off the duct on both sides to detach the two pieces.
2. Clean inside basement registers. Generally duct work will contain registers installed throughout the system to distribute air for the basement. If you take away these registers, you will acquire even further access to the major trunk line.

Congratulations!